The machines are designed for indoor installation and ducting for air suction and discharge.
For outdoor installation the machine must be installed under a cover or anyway protected against atmospherics agent.
DRY COOLER PF dry coolers equipped with plug fans.
Nominal capacity: 8,8 - 89,0 kW
The DRY COOLER PF series is available in 3 versions:
DRY COOLER PF STD - No air flow and sound level reduction
DRY COOLER PF LNO – Air flow reduction at 85% with consequent sound level reduction.
DRY COOLER PF ELN – Air flow reduction at 70% with further sound level reduction.
Design, assembly and test as per the Company Quality Assurance program in full compliance with ISO 9001:2008.
RC Group has been the first Italian company in its segment to get the Company Quality Assurance in October 13th, 1991 with certificate ICIM 0018.
Environmental Management System Certification according to ISO 14001:2004.
The machines are in full compliance with European Directive 2006/42CE, 2006/95CE, 2004/108CE, 97/23CE and subsequent amendments.
Base, self supporting frame and panelling in steel plate with protective surfaces treatment in compliance with UNI ISO 9227/ASTMB117 and ISO 7253, and painted with epoxy powders.
Colour: RAL 9002
FANS SECTION – TEAM MATE
Centrifugal fans with backward curved blades with wing profile, single suction and without scroll housings (Plug-fans).
Brushless type synchronous EC motor with integrated electronic commutated system and continuous variation of the rotation speed.
The motor rotation control is obtained with the EC system (Electronic Commutation) that manage the motor according to the 0-10V proportional signal coming from the internal unit microprocessor control.
IP54 enclosure class.
Heat exchanger coil with copper tubes and high efficiency aluminum fins, specifically developed to provide high heat transfer and lower pressure drops. The combination of two factors, special tubes and fins, allow to optimally combine the following aspects:
Frame in galvanized steel.
In accordance with EN60204-1 norms, suitable for outdoor installation, IP54 enclosure class, complete with:
Terminals for power supply (from network).
Terminals for 0-10V signal for fan speed control (connect to indoor machine).
Terminals for alarm signal (connect to indoor machine).
|Brochure DRY COOLER PF|
|Technical Catalogue DRY COOLER PF 2013|