DRY COOLER 2013...... 8,3 - 172,0 kW
Main features
Main features
The machines are made with weather resistant materials and suitable for outdoor installation.
SERIES IDENTIFICATION
DRY COOLER dry coolers equipped with axial fans.
Nominal capacity: 8,3 - 172,0 kW
The DRY COOLER series is available in 3 versions:
DRY COOLER STD - No air flow and sound level reduction
DRY COOLER LNO 85% – Air flow reduction at 85% with consequent sound level reduction.
DRY COOLER LNO 70% – Air flow reduction at 70% with further sound level reduction.
Design, assembly and test as per the Company Quality Assurance program in full compliance with ISO 9001:2008.
RC Group has been the first Italian company in its segment to get the Company Quality Assurance in October 13th, 1991 with certificate ICIM 0018.
Environmental Management System Certification according to ISO 14001:2004.
The machines are in full compliance with European Directive 2006/42CE, 2006/95CE, 2004/108CE, 97/23CE and subsequent amendments.
Main components
FRAMEWORK
Base, self supporting frame and paneling in steel plate with protective surfaces treatment in compliance with UNI ISO 9227/ASTMB117 and ISO 7253, and painted with epoxy powders.
Colour: RAL 9002
FANS SECTION – TEAM MATE
Axial fans with sickle-shaped blades, fan guard and optimized for low noise levels.
External rotor electric motor with stepless variable speed for condensing pressure control.
The motor rotation control is obtained according to the 0-10V proportional signal coming from the internal unit microprocessor control.
IP54 enclosure class.
DISSIPATIVE COIL
Heat exchanger coil with copper tubes and high efficiency aluminium fins, specifically developed to provide high heat transfer and lower pressure drops. The combination of two factors, special tubes and fins, allow to optimally combine the following aspects:
- Maximum capacity relative to the size of the exchanger.
- Reduction of the air flow required for the heat exchange.
Frame in galvanized steel.
ELECTRICAL PANEL
In accordance with EN60204-1 norms, suitable for outdoor installation, IP54 enclosure class, complete with:
Terminals for power supply (from network).
- 400/3/50+N for models "T"
- 230/1/50 for models "M".
Terminals for 0-10V signal for fan speed control (connect to indoor machine).
Terminals for alarm signal (connect to indoor machine).
Fans speed regulator for fan speed control.
OPTIONAL ACCESSORY
Support legs for vertical air flow
Дополнительные материалы
| Brochure DRY COOLER |
|
| Technical Catalogue DRY COOLER 2013 |
|