TEAM MATE PF 2013...... 12,1 - 154,0 kW
Main features
Main features
The machines are designed for indoor installation and ducting for air suction and discharge.
For outdoor installation the machine must be installed under a cover or anyway protected against atmospherics agent.
SERIES IDENTIFICATION
TEAM MATE PF remote air cooled condensers equipped with plug fans.
Nominal capacity: 12,1 - 154,0 kW
The TEAM MATE PF series is available in 3 versions:
TEAM MATE PF STD - No air flow and sound level reduction
TEAM MATE PF LNO – Air flow reduction at 85% with consequent sound level reduction.
TEAM MATE PF ELN – Air flow reduction at 70% with further sound level reduction.
Design, assembly and test as per the Company Quality Assurance program in full compliance with ISO 9001:2008.
RC Group has been the first Italian company in its segment to get the Company Quality Assurance in October 13th, 1991 with certificate ICIM 0018.
Environmental Management System Certification according to ISO 14001:2004.
The machines are in full compliance with European Directive 2006/42CE, 2006/95CE, 2004/108CE, 97/23CE and subsequent amendments.
Main components
FRAMEWORK
Base, self supporting frame and paneling in steel plate with protective surfaces treatment in compliance with UNI ISO 9227/ASTMB117 and ISO 7253, and painted with epoxy powders.
Colour: RAL 9002
FANS SECTION – TEAM MATE
Centrifugal fans with backward curved blades with wing profile, single suction and without scroll housings (Plug-fans).
Brushless type synchronous EC motor with integrated electronic commutated system and continuous variation of the rotation speed.
The motor rotation control is obtained with the EC system (Electronic Commutation) that manage the motor according to the 0-10V proportional signal coming from the internal unit microprocessor control.
Maintenance-free bearings
IP54 enclosure class.
AIR/GAS HEAT EXCHANGERS
Heat exchanger coil with internally corrugated copper tubes and high efficiency aluminum fins, specifically developed to provide high heat transfer and lower pressure drops. The combination of two factors, special tubes and fins, allow to optimally combine the following aspects:
- Maximum capacity relative to the size of the exchanger.
- Minimum charge of refrigerant.
- Reduction of the air flow required for the heat exchange.
Frame in galvanized steel.
REFRIGERANT CIRCUIT – TEAM MATE PF
Valves on gas and liquid line for coupling to refrigerant pipe. The valves are supplied not installed. The condenser is supplied with nitrogen seal.
ELECTRICAL PANEL
In accordance with EN60204-1 norms, suitable for outdoor installation, IP54 enclosure class, complete with:
Terminals for power supply (from network).
- 380-480/3/50-60 for models "T"
Terminals for 0-10V signal for condensing control system (connect to indoor machine).
Terminals for alarm signal (connect to indoor machine).
Дополнительные материалы
| Technical Catalogue TEAM MATE PF 2013 |
|
| Brochure TEAM MATE PF |
|