TEAM MATE 2013...... 12,1 - 307,0 kW
Main features
Main features
The machines are made with weather resistant materials and suitable for outdoor installation.
SERIES IDENTIFICATION
TEAM MATE remote air cooled condensers equipped with axial fans.
Nominal capacity: 12,1 - 307,0 kW
The TEAM MATE series is available in 3 versions:
TEAM MATE STD - No air flow and sound level reduction
TEAM MATE LNO – Air flow reduction at 85% with consequent sound level reduction.
TEAM MATE ELN – Air flow reduction at 70% with further sound level reduction.
Design, assembly and test as per the Company Quality Assurance program in full compliance with ISO 9001:2008.
RC Group has been the first Italian company in its segment to get the Company Quality Assurance in October 13th, 1991 with certificate ICIM 0018.
Environmental Management System Certification according to ISO 14001:2004.
The machines are in full compliance with European Directive 2006/42CE, 2006/95CE, 2004/108CE, 97/23CE and subsequent amendments.
Main components
FRAMEWORK
Base, self supporting frame and paneling in steel plate with protective surfaces treatment in compliance with UNI ISO 9227/ASTMB117 and ISO 7253, and painted with epoxy powders.
Colour: RAL 9002
FANS SECTION – TEAM MATE
Axial fans with sickle-shaped blades, fan guard and optimized for low noise levels.
External rotor electric motor with stepless variable speed for condensing pressure control.
The motor rotation control is obtained according to the 0-10V proportional signal coming from the internal unit microprocessor control.
IP54 enclosure class.
AIR/GAS HEAT EXCHANGERS
Heat exchanger coil with internally corrugated copper tubes and high efficiency aluminum fins, specifically developed to provide high heat transfer and lower pressure drops. The combination of two factors, special tubes and fins, allow to optimally combine the following aspects:
- Maximum capacity relative to the size of the exchanger.
- Minimum charge of refrigerant.
- Reduction of the air flow required for the heat exchange.
Frame in galvanized steel.
REFRIGERANT CIRCUIT – TEAM MATE
Valves on gas and liquid line for coupling to refrigerant pipe. The valves are supplied not installed. The condenser is supplied with nitrogen seal.
ELECTRICAL PANEL
In accordance with EN60204-1 norms, suitable for outdoor installation, IP54 enclosure class, complete with:
Terminals for power supply (from network).
- 400/3/50+N for models "T"
- 230/1/50 for models "M".
Terminals for 0-10V signal for condensing control system (connect to indoor machine).
Terminals for alarm signal (connect to indoor machine).
Fans speed regulator for condensing control (only for TEAM MATE with axial fans).
OPTIONAL ACCESSORY
Support legs for vertical air flow
Дополнительные материалы
| Technical Catalogue TEAM MATE 2013 |
|
| Brochure TEAM MATE |
|